1.Single pillar swing barrier gate,can be used with single unit and forming the lane with two units.
2.Indoor and Outdoor application.
3.Lane width of 650mm( normal );980-1140mm (wheelchair/trolley/cart)
4.Adopt brush-less motor with longer lifespan.
5.Non-polar collision avoidance, it has strong resistance to destruction.
6.Adopt module structure design,which has easier operation and less maintenance.
7.High cost effectiveness.
Optional Turnstile Solution
1. Frame material of Stainless steel 304 or Steel201 with powder coated color.
2. Swing barrier : Stainless Steel 304/Arcylic glass
3. Barrier length(mm):650-1140mm.
Contact us to obtain more information!
1)Can be connected with a variety of card-reading device, and receive the signal of relay switch.
2)Can be connected by external switch button or remote control, to switch the passing mode between uni-direction or bi-direction.
3)With the automatic reset function, The swing arm closes automatically in certain elapse time (3 s, 5 s, 10 s, 60 s for optional)
4)Mechanical anti-pinch design that system will automatically detect and stop running when human body or other objects impede its moving , swing power is small so that it won't hurt human or damage the objects.
5)Humanized self protection：
When turnstile is impeded by human body or other objects, the system will continuously detect 1-5 times (every 5 seconds), if the obstacles is not relieve then the system will automatically stop and under dormant state, effectively avoid damage the original device. When receive the next effective passing request ,it will automatically restore to normal state.
When system fails to detect and reset signals properly (i.e., swing arm hit the box), system automatically detect 1 to 5 times, each time for 5 seconds, if still there and it is no reset signal, the swing arm automatically return to normal lock status.( Function declarations: even if the reset light accidentally be damaged, gates can still stay opening even if circuit burn or electrical failure.
6) Open and close speed can be adjusted within 0.8 2 s, with 16 gear, according to the demand ,freely adjust on and off speed .
Swing Barrier Gate Technical Parameter :
Cylinder Material: International standard stainless steel 304, Size:Cylinder dia:168mm*Height:1050mm Weight: about 35-45kg Barrier length: 300-600 mm(can be lengthen or shorten for actual situation) Input voltage: AC220±10% V,50HZ Driving motor: DC 50W/24V Motor speed:1600R/M Input interface: RS232 Relay switch signal Flow rate:40 person /minute(normal open),25-30 person/m(normal close) Necessarily time for entering to the passing status after power on:3s Required time for system reset after failure:10s Working environment: Indoor and outdoor(canopy is suggested) Suitable working temperature: -40℃—— 80℃ Suitable humidity: 5％—— 90％
Dimension, Material & Surface Treatment:
Appearance: Proper modifications can be made according to your project requirements.
Material of the cabinet: 304 / 316 grade stainless steel.
Stainless steel thickness of the cabinet: Optional range of 1.5~3.0mm.
Lane width may be changed accordingly.
Material of the swing gate: tempered glass / acrylic/ and color can be tailored.
Material of the flap gate:transparent acrylic glass/ soft silicon gel (red/blue color is optional)
Surface treatment of the cabinet: brushing/polishing / frosted finish / electroplating / baking finish.
Can be integrated with access control system, ticketing system, time attendance system, visitor system etc.
Built-in reader appointed by customers.
Integrate with face recognition system, fingerprint identification system, ID/IC card recognition system, passport identification system, QR code system, etc.
The installation position of direction indicator can be adjusted.
The pattern of direction indicator can be customized.
Built-in or external counter
Equipped with TCP / IP communication
Audible and visual alarm function
For customization requirements not mentioned above, if any, please communicate with CXT sales team in detail.