1. The swing arm opening speed of the swing barrier gate can be set to meet the requirements of different occasions.
2. It has fault self-inspection and prompts alarm function to facilitate user maintenance and use.
3. It offers a variety of working modes to choose from. You can bidirectional card reading or fingerprint current limiting; read your card or fingerprint on one side and ban traffic in the other direction; read your card or fingerprint on one side and free passage in the other order.
4. Anti-clamp, anti-collision function. When the swing barrier gate encounters resistance in the process of swing arm reset, the motor will automatically stop working in the specified time. It will reset again after defaulting (until reset), and the strength is very small (≤2Kg).
5. Anti-shock function. Swingarm automatically when no open signal is received.
6. The swing barrier gate's swingarm is synchronously adjustable (for a double swing case). It is reasonable and reliable and has low noise, smooth operation, and long service life.
7. Automatic reset function. The system will automatically cancel the user's permission to pass this time if you don't go through within the specified time after the swing barrier gate is opened.
8. Anti-tailing. It can prevent the unauthorized situation of too many people going through at one time.
9. Automatic reset function. The system will automatically cancel the user's permission to pass this time and restore to the initial state if you don't go through within the specified time after the swing barrier gate is opened.
10. Swing barrier gate is waterproof, sunscreen, cold-resistant, high temperature resistant.
11. Advanced transmission system is adopted to lock the gate machine of the swing barrier gate at zero position and make it more accurate and reliable.
12. It is compatible with IC, ID cards. You can configure it yourself.
13. It can be used with other types of channel products.
1. The buried coil of the swing barrier gate is loose
When the local sensor coil can not be firmly fixed in the nest, the road surface's vibration will cause the nest coil's deformation and change the initial inductance of the ground sensor. At this time, the sensor must be reset before it can work normally.
Solution: Pour melted bitumen in to fix it.
2. Articulated screw of the swing barrier gate is loose
The adjustable joint screws are connected with positive and negative threads, and the upper and lower bearings are connected with double-headed screws. If the screws are loose, the upper and lower positions will be inaccurate. We can Insert an 80mm long ф4 iron rod rotate the adjustment lever up and down between the twin screws.
3. Turn arm screw of the swing barrier gate is loose
If the screw is loose, it will cause the moving gate's upper and lower positions to be inaccurate, and the shaking is larger when the lever is stopped. We should tighten the bolts and the nuts.
English
Español